Side-clamp
Dimensions / Performance
| Model | CAD | d1, d2 | (±0.3mm) | Screw | Permissible Torque (N·m) |
Max. rpm (min-1) |
Moment of Inertia (kg·m2) |
Static Torsional Stiffness (N·m/rad) |
Mass (g) |
Permissible Misalignment | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D1, D2 | L | L1 | F | Size | Fastening Torque (N·m) |
Angular (˚) |
Parallel mm |
End-play (mm) |
||||||||
| SCDS-68C |  |
18~25 | 68 | 47 | 55.9 | 25 | 7 | M6 | 14 | 90/100 | 18,000 | 0.42×10-3 | 9.7×104 | 660 | 1 | 0.02 | ±0.5 |
| 28~35 | 56 | ||||||||||||||||
| SCDS-78C | |
22~26 | 78 | 53 | 67.7 | 30 | 8.5 | M8 | 34 | 200 | 17,000 | 1.23×10-3 | 2.1×105 | 1,400 | 1 | 0.02 | ±0.5 |
| 28~35 | 70 | ||||||||||||||||
| 38 | 74 | ||||||||||||||||
| SCDS-88C | |
25~32 | 88 | 66 | 68.3 | 30 | 8.5 | M8 | 34 | 250/300 | 15,000 | 1.6×10-3 | 2.3×105 | 1,550 | 1 | 0.02 | ±0.5 |
| 35~42 | 74 | ||||||||||||||||
- The Moment of Inertia and Mass values are based on products with max. Inner diameter
- The permissible torque is determined by its inner diameter size. Please refer to the bottom of the page for more details.
Standard Inner Diameter (ID)
| Model | Permissible Torque (N·m) |
Standard Inner Diameter (d1, d2) (mm) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 18 | 19 | 20 | 22 | 24 | 25 | 26 | 28 | 30 | 32 | 35 | 38 | 40 | 42 | ||
| SCDS-68C | 90 | ● | ● | ||||||||||||
| 100 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||||
| SCDS-78C | 200 | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||
| SCDS-88C | 250 | ● | ● | ● | |||||||||||
| 300 | ● | ● | ● | ● | ● | ● | |||||||||
- The recommended shaft tolerance is h7.
- Custom process (e.g. non-standard Inner diameter, special tolerance etc.) is also available upon a special request in prior to order placement.
- The permissible torque of a complete SCD coupling should be considered according to the smaller inner diameter’s value.
- Keyway is NOT available for all sized SCD series.